123 HP AMP 130 Printer

How to 123 hp AMP 130 printer with few easy steps

With the HP AMP 130 printer, you can print a document from anyplace, at any time from your mobile device. Take your phone calls directly from the HP AMP 130 printer and keep your smartphone charged with the built-in USB port. Connect the HP AMP 130 printer and computer via a USB, Wireless, Wi-Fi Direct, and Bluetooth. The printer works with Windows and Mac operating system. With the HP Smart app, easily print and scan your document on the go.

Need Help For 123 HP AMP 130 Printer. Call 1-866-309-6188

hp setup call

123 HP AMP 130- Specifications

  1. The HP AMP 130 is an Energy Star Certified printer which means the printer saves energy while it is in usage.
  2. With the Duplex printing feature, print your document on both sides of the page.
  3. Paper handling capacity: Input tray is up to 60-sheets and the output tray is up to 25-sheets.
  4. The HP AMP 130 printer’s maximum print speed for black is up to 7.5ppm and for color is up to 5.5ppm.
  5. Connect your smartphone directly to the printer and easily print a document without a network.
hp amp 130 printer

123 HP AMP 130 Printer – Unboxing First Time Setup

Here are the steps to setup your AMP 130 printer on your Windows or Mac PC.

For Windows

  • Take out a new printer from the shipment box and then peel off all the tapes and stickers from it.
  • Plug-in the power cord to the rear side of the printer and then connect the other end of the power cord to an electrical outlet.
  • Power on the HP AMP 130 printer. Open the printer’s ink cartridge access door.
  • Remove a new cartridge from its packing material. Make sure that you do not touch the electrical contacts of the cartridge.
  • Hold the ink cartridge by its sides, place the color ink cartridge into the left side of the slot and then insert the black ink cartridge into the right side of the slot.
  • After inserting the cartridges, lock the cartridge access door. The printer starts an initialization process.
  • Place enough papers into the printer’s input tray. Based on the paper size, adjust the paper width guides.
  • Download and install the latest driver and software. For Windows OS, download the .exe file type.
  • Install the driver on the Windows computer where you have saved the documents for printing.
  • For any queries, consult our technical support team at the toll-free number. Our team will resolve the printer issues as soon as possible,

For Mac

  • Unpack the HP AMP 130 printer and its components from its packing material. Remove all the stickers and tapes from the printer.
  • Connect the power cord to the wall outlet and then switch on the HP AMP 130 printer.
  • Unlock the ink cartridge access door. Unwrap all the stickers and tapes from a new cartridge.
  • It is suggested not to touch the electrical contacts of the cartridge. Place the black ink cartridge into the right side of the slot and then insert the tri-color cartridge into the left side of the slot.
  • After inserting the ink cartridges, lock the cartridge access door. Load sufficient papers inside the input tray.
  • Check whether the paper size and type are compatible with the printer. Your printer hardware is now set up and you can install the printer driver.
  • For Mac operating system, download the .dmg file type. After downloading the setup file start to install it on the Mac device.
  • Run and execute the downloaded setup file based on the instructions that are displayed on the screen.
  • During the installation, choose the desired connection type to connect the printer and computer.

123 HP AMP 130 Printer – Software Installation

Here are the steps to Download & Install your Hp AMP 130 printer Software For Windows & Mac.

Windows OS Driver Installation

  1. Follow the procedures that are given below to download and install the full feature printer driver on the Windows computer.
  2. With the help of an installation CD, you can easily install the latest printer driver.
  3. Run and execute the setup file based on the guides that are displayed on the screen.
  4. During the installation process, choose the desired connection type and complete the installation process successfully.
  5. If you find any difficulty while printing a document, move to the next step.
  6. Search for the Driver Download option from this website and click on it to avail the latest driver.
  7. For Windows operating system, you have to download the .exe file type. After downloading the driver, start to install it on the Windows computer.
  8. Make use of the on-screen guides to complete the installation process. Use the printer to print a sample document.

Mac OS Driver Installation

  1. You can use the installation CD to install the printer driver on the Mac device.
  2. Open the computer’s disc drive and insert the CD into it. Based on the on-screen prompts, run and execute the setup file.
  3. Install the .dmg file type on your computer. During the installation, you are instructed to select the connection type.
  4. Check the printer compatibility and choose the required connection type to connect the HP AMP 130 printer and computer.
  5. Use your printer to print a document. If you find any issue with the printer, move to the next step.
  6. Download the updated printer driver from this website. After downloading it, start to install the driver on the Mac device.
  7. You are prompted to choose the connection type during the installation process. Based on the HP AMP 130 printer compatibility, select the connection type.
  8. After completing the installation process, check the printer’s performance by printing a sample document.

Need Help For 123 HP AMP 130 Printer. Call 1-866-309-6188

hp setup call

HP AMP 130 Printer – Ink Cartridge

Refill Ink Cartridge

  1. If you find that the ink level of the cartridge is empty, you have to replace or refill the ink cartridges.
  2. Follow the procedures that are listed below to refill the ink cartridge of your printer.
  3. Open the ink cartridge access door. Remove the empty cartridge from the slot.
  4. At the top cover of the cartridge, you might find the black spot. Underneath the black spot, you might find a hole through which ink can be injected into the cartridge.
  5. Peel off the stickers and fill the ink into the syringe. Slowly inject it into the cartridge hole.
  6. Make sure that there is no air bubbles before you inject ink through the hole.
    After refilling the cartridge, allow it to settle for a few hours. Place the ink cartridge into the respective slot and then lock the cartridge access door.

Replacing Ink Cartridge

  1. It is suggested to estimate the ink level of the cartridge periodically. During the estimation process, if you find that the cartridge is empty, you need to replace it with a new one.
  2. Open the ink cartridge access door. Remove the empty cartridge from the slot.
  3. Take off a new cartridge from its packing material. Peel off all the tapes and stickers from it.
  4. Ensure that the cartridge you are using for printing is free from dust.
  5. Place the tri-color cartridge into the left side of the slot and then insert the black ink cartridge into the right side of the slot.
  6. After inserting the cartridge, make sure that the cartridges are inserted properly into the slot.
  7. Lock the cartridge access door. Try to print a sample document using the printer.

HP AMP 130 Wireless Printing Setup

  • Before setting up the printer, you need to gather the wireless network name and password.
  • Power up the HP AMP 130 printer, computer and the wireless router. Ensure that you use the same wireless network connection to connect the printer and computer.
  • To maintain the wireless signal strength, position all the network connected devices at a minimum distance.
  • Unplug any Ethernet or USB cable from the printer. You need to download and install the updated driver and software for the printer.
  • If you are a Windows user, you need to download the .exe file type. If you are a Mac user, you need to download the .dmg file type.
  • After completing the download process, you need to install the driver on the computer.
  • Based on the on-screen instructions start to install the printer driver on your device.
  • During the installation process, you have to select the connection type. Check the printer compatibility and choose the required connection type.
  • Try to print a sample document using the printer to check its performance.
  • If the printer prints a document, you can continue with a print job. If not, check the network connection.

HP AMP 130 USB Printing Setup

  • Verify if the HP AMP 130 printer is powered on. Acquire a USB cable that is less than 3m in length.
  • In case you link through a USB hub or docking station, the printer will not get enough power to operate well.
  • Unlink the printer USB cable from the system. Do not relink the cable until instructed during the driver installation process.
  • Find Devices from Windows and then select the Devices and Printers control panel setting in the results.
  • Right-click the printer icon and then select Remove device. In case multiple icons exist for the printer, you have to exclude them all.
  • Now you have to download and install the updated printer driver and software.
  • Download the .exe file type for the Windows operating system and download the .dmg file type for the Mac operating system.
  • During the installation, you are instructed to select the connection type. Choose USB as the connection type.
  • Complete the installation process by following the guides that are displayed on the screen.
  • To get more information about USB setup, contact our technical support team at the toll-free number.
  • DISCLAIMER: Our website is independent service provider aiming to solve technical issues related to 123 HP AMP 100 Printer. The names, brands, images, trademarks and products are used for reference and we do not claim any ownership, right to, affiliation with, or endorsement by, any such third parties unless stated. Download the latest and updated drivers and software from 123.hp.com/AMP130